Skip to main content

High-chromium alloy elbow 90 degree

High-chromium alloy elbow 90 degree is a high-strength low-alloy rare earth heat, wear and pipe fittings suitable for power plant coal boiler systems, powder feeding, ash slagging pipe. RE wear resistant alloy pipes well, give full play to the high chromium cast iron (KmTBCr28MoCuRe) wear resistance.
Pressure is high. Applicable to any pressure level. Use in conjunction with the outer lining tight, using a special process to form a connection between the composite layer solution to ensure the reliability of operation, has good resistance to mechanical shock, thermal shock resistance, easy installation and connection, any cutting, welding.
Steel – High-chromium-nickel alloy composite pipe complex by the outer wall and the inner liner is made of 5-12mm thick wall seamless steel pipe, lined 6-25mm thick high-chromium-nickel alloy, centrifugal composite made of straight pipe, pipe vacuum negative forged, the product takes full advantage of the large seamless steel pipe bearing capacity, high hardness and good welding performance of high chromium-nickel alloy (HRC55 – 60), is an ideal abrasion pipeline.
Wear-resistant pipes including wear elbow, straight pipe, structural tee, head size, radius sections, adjustable tube, mainly for pneumatic pumping slurry pipelines and other materials. Because the transmission medium with high hardness, flow speed, flow rate, etc., can effectively reduce the transmission medium to produce long-lasting impact on the wall, wear, corrosion fatigue resulting in the duct velocity gradually being worn.
Delivery has been around electricity, metallurgy, coal, petroleum, chemicals, building materials, machinery and other industries, and high-speed developing. When transporting large grinding abrasion resistant material inside the pipe (such as ash, coal, mineral powder, tailings, cement, etc.), there is a wear-resistant pipe wear quickly, especially elbow wear faster . When the inner wear has strong corrosive piped gas, liquid or solid, the presence of corrosion and wear quickly damage the pipe is a problem. When the inner wear-piped with a high temperature material, there is a heat-resistant steel prices are very expensive problem. After the wear-resistant pipe market, these problems are solved. Wear-resistant pipes are widely used in severe wear mine backfill, ore powder and tailings transport, coal-fired power plant feed powder, slag, ash and other wear-resistant pipes are also very suitable. Wearable strong pipeline is to transport corrosive acids, bases, salts and abrasion both solid, liquid delivery pipeline ideal abrasion. Wear resistant pipe corrosion at high temperatures, high temperatures or high wear occasions ablation using very safe and reliable.
Superior characteristics of high wear-resistant chromium-nickel bimetallic tubes – Steel:
1, wear-resistant performance is good:
The composite pipe lined with high-chromium-nickel alloy, hardness HRC55 ~ 60, is a high abrasion resistance materials. Using special compound modifier grain refinement, greatly improving the toughness of the product, the tensile strength. Elbow eccentric production, wear much better than steel – ceramic composite pipe.
2, the pressure big:
The outer wall of seamless steel pipe products, is a big hub bearing technology, lined with high-chromium-nickel alloy to resist abrasive wear, not to withstand high pressure, the more rare wearable steel pipe, steel – ceramic composite tube to better ensure safe operation, so the product combination used for high pressure and high concentration of long-distance transport pipe.
3, high temperature:
Lined with high chromium-nickel alloy can be applied without modification at 600 ℃ premise, no oxidation, and to maintain high wear resistance.
4, good corrosion resistance:
High chromium-nickel alloy for 5% or less of sulfuric acid, hydrochloric acid, hydrofluoric acid, caustic corrosion performance reached more than 99%.
5, good appearance, anti-fouling:
The appearance of seamless steel pipe products, greatly improving the appearance of the product quality, the installation can improve engineering standards, lined with centrifugal and vacuum forging, smooth wall, greatly improving the ability of anti-fouling pipeline.
6. Installation facilitate:
The outer wall seamless steel pipe specifications, greatly facilitate the design and installation of the pipe, while the welding performance is good, can be welded, flanged connections.
The main application of high wear-resistant chromium-nickel bimetallic tubes – Steel:
Thermal power plant coal transportation system, wet dry ash conveying pipe, gravel coal system
Other power delivery system particles
All kinds of mining material handling
Hydraulic transmission systems and larger particle size slag slurry transportation

Related products

Sleeve Type Expansion Joints

Sleeve Type Expansion Joints are primarily designed to compensate for thermal expansion but it is not the only movement being imposed on the pipeline system. Other types of movements can occur that need to be taken into account when providing a pipework flexibility solution such as building settlement, wind loading, vibration from rotating and reciprocating machinery. Related  Ceramic lined pipe Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique. The sleeve type expansion joint is also called tube compensator, pipe expansion joints, which is used for hot fluid pipelines, mainly applied to the laying of straight pipelines. And the working medium can be hot water, steam, oil, etc. The sleeve expansion joint does thermal expansion by sliding its external sleeve. Sleeve compensator Types of Sleeve Type Expansion Joint: Buried sleeve expansion joint: Using advanced sealing structure and sealing materials with the features of easy installation...

Sleeve Type Expansion Joints

Sleeve Type Expansion Joints are primarily designed to compensate for thermal expansion but it is not the only movement being imposed on the pipeline system. Confirmed and drawing by our engineer Other types of movements can occur that need to be taken into account when providing a pipework flexibility solution such as building settlement, wind loading, vibration from rotating and reciprocating machinery. The sleeve type expansion joint is also called tube compensator, pipe expansion joints, which is used for hot fluid pipelines, mainly applied to the laying of straight pipelines. And the working medium can be hot water, steam, oil, etc. The sleeve expansion joint does thermal expansion by sliding its external sleeve.

Types of wear-resistant ceramic pipe and its application in industrial production

Including abrasion resistant ceramic pipe elbow, straight pipe , structural tee, head size, radius sections , adjustable pipe , mainly used for the air force , pumping slurry pipeline and other materials . Because the transmission medium with high hardness, flow speed , flow characteristics, can effectively reduce the transmission medium to the wall to produce long-lasting impact, abrasion , corrosion fatigue causes the pipe was gradually worn out speed. 1 , the definition of wear-resistant ceramic pipe Depending on the working conditions of wear on the wear-resistant ceramic pipe lining materials have different choices. Resistant ceramic lined pipe ( lining of aluminum oxide , silicon carbide , zirconia, silicon nitride , sialon , aluminum nitride, boron nitride , etc. ) ; resistant alloy tube ; hexsteel wearable pipe fittings ; rubber resistant steel grinding tube ; wear-resistant plastic tube ; wear-resistant cast stone pipe ; wearable self-propagating composite pipe ; rare earth al...

Tubes Erosion Shields

Tubes Erosion Shields are used to reduce excess wear of boiler tubes within the extreme conditions prevalent inside a fossil fuel fired boiler, Sunny Steel is able to manufacture and supply erosion shield solutions to protect and reduce wear in all applicable boiler related situations. Boiler Tube Shields are designed to eliminate major maintenance and downtime costs from boiler and condenser tube failure. Advantages Tube Shields are custom made to fit perfectly to straight sections, curved sections and even finned and specialised tubing. Boiler Tubes Erosion Shields, also known as anti-corrosion Shields, anti-wear plate, anti-wear protection Shields, anti-wear cover plate, anti-corrosion cover plate, boiler climbing pipe, anti-wear pressure plate, etc. , which are used in combination with snap rings. Boiler Tubes Erosion Shields are produced using a high-pressure press and professional mold pressing. The production time is short, the welding performance is good, the welding should not...

Al2O3 Wear and Corrosion Resistant Seamless Steel Pipe Ceramic Lined Ben...

Wear and Corrosion Resistant Seamless Steel Pipe Ceramic Lined Bending Pipe consist of three parts (steel pipe + adhesive + ceramic tiles).

Ceramic sleeve lined Pipe

The ceramic tube or ceramic sleeve sintered as a whole part, and then assemble it into the steel pipe with our high-strength-temperature-resistant epoxy adhesive. The ceramic sleeve lined pipe has a smooth inner wall, excellent tightness as well as good wear and chemical resistance ability. Alumina ceramic sleeve lined pipe with flange Ceramic sleeve lined pipe with flange Ceramic sleeve lined reducer Alumina ceramic sleeves lined pipe Alumina ceramic sleeve lined pipe export to australia 95% alumina ceramic sleeve lined pipes, elbows and T pipes have been largely applied in lithium battery material conveying system in recently years. Wear abrasion stainless ceramic pipes with below advantages: Better purity for inside and outside pipe materials; More abrasive; Higher corrosion resistance; Stronger impacting resistance; Better high temperature resistance Smaller flatness of inside pipe(ceramic flatness≤0.5mm) In addition, the flatness of ceramic casing is also an important factor affec...

Properties of the Ceramic-lined Steel Composite Pipes

Ceramic (Corundum: a-Al2O3) lined abrasion resistant straight pipe and fittings are lined with highly abrasion resistant ceramic by SHS -------Self-propagating High-temperature Synthetic process. Ceramic-lined Steel Composite Pipes Physical Properties Microstructure of ceramic layer Section of the composite pipe Mechanical Propertie: Hoop Strength: Hoop strength is the resistance against radial pressure. The strength of the ceramic -lined steel composite pipe is 300 to 500MPa. Compression-Shear Strength: Compression-shear strength is the bonding strength at the interface between the ceramic layer and the steel pipe. The compression-shear strength of the ceramic-lined composite pipe is 15 to 20MPa. Resistance to Mechanical Shock The ceramic layer does not crack or flake off when the composite pipe receives a mechanical shock. Resistance to Thermal Shock The ceramic layer does not crack or flake off when heated to 800℃ and then quenched. Resistance to Abrasion: The ceramic-lined steel co...

Backpack wear resistance ceramic elbow with flange

Six performance summary of the composite pipe of the ceramic composite pipe 1, good wear resistance Ceramic composite pipe with inner liner for ceramic corundum (a-AL2 (subscript) O3 (subscript, similarly hereinafter), Mohs hardness can reach 9.0 rather than hrc90. Therefore, the grinding medium of all industries are highly resistant to wear. The industrial operation confirmed: its wear life is ten times the quenching steel or even dozens of times. 2, running resistance: Ceramic composite pipe due to the smooth surface of the inner surface is better than any metal pipe, water resistance coefficient of 0.0193, slightly lower than the seamless tube. 3, corrosion resistance, anti fouling: Since the ceramic layer is (a-AL2O3), it is a neutral material. Therefore has the acid alkali and water resistance, and at the same time with anti - scale and so on. 4, heat resistance and heat shock resistance performance is good: As the corundum ceramic (a-AL2 (subscript) O3 (subscript)) is a single st...

Get to contact us

Name

Email *

Message *