Carbon steel pipe conveying medium and can prolong the service life of ceramic lining

Carbon steel pipe material is widely used in various industries such as petroleum, chemical, mechanical, metallurgy, food and so on.
Carbon steel pipe can withstand high pressure, can resist high temperature, used for transporting steam, compressed air, inert gas body, gas, natural gas, hydrogen, oxygen, acetylene, ammonia, liquid ammonia, water, oil and other media.
Since the carbon steel has a certain corrosion resistance, so carbon steel pipe can be used to transport at room temperature alkali solution and corrosion medium "after heat treatment to eliminate welding stress force, carbon steel pipe can also be used to transport the caustic]. The carbon steel pipe can also be used for conveying other corrosive media, such as the lining of the corrosion resistant coating, or the corrosion resistant material lining, such as lead and rubber.
2 low alloy steel tube
Low alloy steel pipe is generally made of pearlite heat resistant steel, which is characterized by high strength and heat resistance, and has a certain resistance to corrosion.
(1) has good mechanical properties and processing properties of 16Mn, using a temperature of 40 ~ 475 DEG C, good weldability, welding at ambient temperature generally without preheating, needs no heat treatment after welding, 16Mn steel yield strength ratio of about 20 high-quality carbon steel is as high as 30%, the corrosion resistance of also more than 20 steel. It is mainly used in medium high pressure pipe and vessel.
(2) 15CrMo and 12CrMo have sufficient creep strength and antioxidant capacity, so the heat resistance is good, and has a certain anti - sulfur effect. 12CrMo steel using temperature 350 ~ 450 DEG C, 15CrMo steel using 350 ~ 560 DEG C temperature. Their cold processing performance is good, cold and hot bending, but after bending need by 850 ~ 900 Deg. C normalizing treatment; welding performance is good, but before welding should be preheated and after welding to heat treatment. Mainly used for conveying high temperature and high pressure steam medium and medium temperature and medium pressure medium (such as semi water gas, hydrogen gas, etc.) and high temperature oil and gas.
(3) due to the presence of vanadium and improving the stability of the organization, the heat resistance is higher than that of 12CrMo and 15CrMo and make the temperature of 350 ~ 580 DEG C, 12CrMoV steel machining performance and welding performance and 12CrMo similar, manual electric arc welding E5515-B2-V welding rod, welding should be preheated to 250 ~ 350 DEG C, backward welding line 730 ~ 760 DEG C tempering treatment. Manual gas welding using H08CrMoV welding wire, welding after 1000 and 740 ~ 760 DEG C normalizing and tempering. Mainly used for conveying high temperature high pressure steam medium.
My company's wear resistant ceramic pipe is in the inner lining of the carbon steel tube, which is the final material in the transmission of wear and tear is ceramic, so long life, and some can be used for more than ten years, especially in the power plant, cement, chemical and other enterprises.
Wear resistant ceramic pipe is also divided into two kinds of one is the overall ceramic pipe, one is the placement of ceramic pipe, can be selected according to the material delivery.

Sleeve Type Expansion Joints

Sleeve Type Expansion Joints are primarily designed to compensate for thermal expansion but it is not the only movement being imposed on the pipeline system. Other types of movements can occur that need to be taken into account when providing a pipework flexibility solution such as building settlement, wind loading, vibration from rotating and reciprocating machinery. Related Ceramic lined pipe Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique. The sleeve type expansion joint is also called tube compensator, pipe expansion joints, which is used for hot fluid pipelines, mainly applied to the laying of straight pipelines. And the working medium can be hot water, steam, oil, etc. The sleeve expansion joint does thermal expansion by sliding its external sleeve. Sleeve compensator Types of Sleeve Type Expansion Joint: Buried sleeve expansion joint: Using advanced sealing structure and sealing materials with the features of easy installation...

Sleeve Type Expansion Joints

Sleeve Type Expansion Joints are primarily designed to compensate for thermal expansion but it is not the only movement being imposed on the pipeline system. Confirmed and drawing by our engineer Other types of movements can occur that need to be taken into account when providing a pipework flexibility solution such as building settlement, wind loading, vibration from rotating and reciprocating machinery. The sleeve type expansion joint is also called tube compensator, pipe expansion joints, which is used for hot fluid pipelines, mainly applied to the laying of straight pipelines. And the working medium can be hot water, steam, oil, etc. The sleeve expansion joint does thermal expansion by sliding its external sleeve.

Tubes Erosion Shields

Tubes Erosion Shields are used to reduce excess wear of boiler tubes within the extreme conditions prevalent inside a fossil fuel fired boiler, Sunny Steel is able to manufacture and supply erosion shield solutions to protect and reduce wear in all applicable boiler related situations. Boiler Tube Shields are designed to eliminate major maintenance and downtime costs from boiler and condenser tube failure. Advantages Tube Shields are custom made to fit perfectly to straight sections, curved sections and even finned and specialised tubing. Boiler Tubes Erosion Shields, also known as anti-corrosion Shields, anti-wear plate, anti-wear protection Shields, anti-wear cover plate, anti-corrosion cover plate, boiler climbing pipe, anti-wear pressure plate, etc. , which are used in combination with snap rings. Boiler Tubes Erosion Shields are produced using a high-pressure press and professional mold pressing. The production time is short, the welding performance is good, the welding should not...

wear resistant ceramic elbow with backpack

Application range 1, coal pulverizing system of power plant pipeline, including, powder transmission pipeline, thick powder separator pipeline, coal drop pipe, combustion system of a wind pipe, a secondary air pipe, three pipeline and burner pipelines, in addition to ash slagging system the discharge pipe, powder pipe, dry ash conveying pipe; 2, iron and steel plant raw material conveying pipeline, collecting pipe, dust pipe, ash pipe, ash pipe, mixing pipe, grinding export pipeline, coal pipeline, coal pipeline, separator pipe, burner radius pipe, etc.; 3, cement plant selection machine outlet pipe, choose machine inlet pipe, pipe dust pipe, vertical mill outlet pipe, circulating air duct, high temperature air blower, lower material pipe, etc.; 4, petroleum, chemical, mining, coal, coal washing plant, smelting, paper, aluminum, building materials, powder engineering, food machinery and other processing and conveying material pipe. Concrete case Application of metallurgy, electric powe...

To help you understand the main features of the wear-resistant composite ceramic pipe

The pipeline is a product that has been developed in recent years. This product has received attention from all aspects. It has a unique advantage of its own. It has been firmly established. Wear self propagating ceramic composite pipe is adopted self propagating ceramic composite pipe aluminum material by centrifugation, heat spreading sintering, because of its good abrasion resistance, water resistance, good corrosion resistance and become one of the many projects in the pipeline wear preferred products, self propagating ceramic composite pipe is easy to break and fall but the manufacturing process the traditional production, and the existence of micro crack, has certain influence on the wear resistance of the process, using the international advanced technology of nano materials, add special additives in traditional ingredients, and the sintering temperature to 2800 DEG C (pressurized aeration technology), SHS products, high strength, small micro crack good toughness, not easy to fa...

Ceramic lined pipe expansion joints

Ceramic lined pipe expansion joints are designed to safely absorb the dimensional changes of pipework systems and ducts caused by heat induced expansion and contraction. They are essential in pipework systems that are used to convey substances of a high temperature, such as steam, heated water or exhaust gases. Expansion joints can also be designed for other applications, such as noise and vibration caused by reciprocating machinery, building settlement and in some extreme environments earthquake movement. Expansion joints are very important components with in a pipework system as they not only solve the problems associated with pipework movement but offer such advantages as reducing stresses and loads to connecting equipment such as pumps and steam turbines.

Ceramic Tile Lined Bend

Ceramic tile lined bending have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. It is well understood that conveying velocity of ash, its density as well as size of ash particles are major factors that determine wear rate of Bends and Y-Pieces. Here, the use of Alumina Ceramic in Ash Handling systems help in lowering the possibility of wear and damages caused to the internals. Here, our expertise lies in filling the linings in casings manufactured at our works or can also be fitted directly in worn out volute casing at plant site. Well package of Alumina Ceramic Lined Bends Some of the industry areas where these are used include: Coal Fired Thermal Power Projects Mineral processing units Steel Plants Cement Plants Coal and Mineral washeries Aluminium plants

Alumina ceramic lined pipes

Ceramic Tile Lined Steel Pipes have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. Ceramics with very low friction factor at low impingement angles decreases the abrasion of materials maximally. Its low density makes it easy to carry and install. Furthermore, its diamond-like hardness, fine grain structure and superior mechanical strength are the unique features that make it a wide range of demanding applications, such as coal preparation, power generation, iron and steel making, cement, asphalt, dredging, mining and mineral processing, oil and gas drilling. The Ceramic Tiles could protect Industrial Components against abrasion, impact wear and high temperature of above 1000C. Standard Flat Tiles of Square & Rectangular Shape having thickness of 6 to 50 mm, with or without central hole are available. Materials: seamless mild steel pipe plus 95% alumina ceramics for liner Designed pressure: >...

Ceramic lined pipe

Search This Blog