Properties of the Ceramic-lined Steel Composite Pipes

Ceramic (Corundum: a-Al2O3) lined abrasion resistant straight pipe and fittings are lined with highly abrasion resistant ceramic by SHS -------Self-propagating High-temperature Synthetic process.

Ceramic-lined Steel Composite Pipes

Physical Properties

Microstructure of ceramic layer

Section of the composite pipe

Mechanical Propertie:

Hoop Strength:
Hoop strength is the resistance against radial pressure. The strength of the ceramic -lined steel composite pipe is 300 to 500MPa.

Compression-Shear Strength:
Compression-shear strength is the bonding strength at the interface between the ceramic layer and the steel pipe. The compression-shear strength of the ceramic-lined composite pipe is 15 to 20MPa.

Resistance to Mechanical Shock
The ceramic layer does not crack or flake off when the composite pipe receives a mechanical shock.

Resistance to Thermal Shock
The ceramic layer does not crack or flake off when heated to 800℃ and then quenched.

Resistance to Abrasion:
The ceramic-lined steel composite pipe has exceptional resistance to abrasion. Its service life in materials transportation with hard abrasives is more than 20 times longer than in common steel pipe.

A composite elbow was used
in a mining plant for about
fifty thousands hours. The
general servicelife of common
steel elbow is about 700 hours.

Resistance to thermal shock

Good Weld Ability

The ceramic-lined steel composite pipe can be joined by welding the steel pipe layer.

Light Weight

The ceramic-lined steel composite pipes are lighter than alloy pipes, cast iron pipes, and cast stone pipes, which reduces the expense of transportation and makes the pipes easier to install.

The relative weight of the
composite pipe is about
40-50% lighter than that of the
caststone pipe

Good weld ability

Convenient Installation

The ceramic-lined steel composite pipes can be easily connected by welding, or with flanges and soft easy connectors.

Convenient installation

The composite pipes have good corrosion-resistant. There is no evidence of corrosion filling the composite pipes with bitter for one year (left), but the common steel pipe under the same condition is corroded seriously (right).

Related informations :

Sleeve Type Expansion Joints

Sleeve Type Expansion Joints are primarily designed to compensate for thermal expansion but it is not the only movement being imposed on the pipeline system. Other types of movements can occur that need to be taken into account when providing a pipework flexibility solution such as building settlement, wind loading, vibration from rotating and reciprocating machinery. Related Ceramic lined pipe Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique. The sleeve type expansion joint is also called tube compensator, pipe expansion joints, which is used for hot fluid pipelines, mainly applied to the laying of straight pipelines. And the working medium can be hot water, steam, oil, etc. The sleeve expansion joint does thermal expansion by sliding its external sleeve. Sleeve compensator Types of Sleeve Type Expansion Joint: Buried sleeve expansion joint: Using advanced sealing structure and sealing materials with the features of easy installation...

Sleeve Type Expansion Joints

Sleeve Type Expansion Joints are primarily designed to compensate for thermal expansion but it is not the only movement being imposed on the pipeline system. Confirmed and drawing by our engineer Other types of movements can occur that need to be taken into account when providing a pipework flexibility solution such as building settlement, wind loading, vibration from rotating and reciprocating machinery. The sleeve type expansion joint is also called tube compensator, pipe expansion joints, which is used for hot fluid pipelines, mainly applied to the laying of straight pipelines. And the working medium can be hot water, steam, oil, etc. The sleeve expansion joint does thermal expansion by sliding its external sleeve.

Ceramic lined pipe elbows

Ceramic - lined pipe is the use of SHS – Manufacturing centrifugation, the melting point of alumina ceramic pipe in 2045 ℃, alumina layer and the steel layer

Ceramic Tile Lined Bend

Ceramic tile lined bending have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. It is well understood that conveying velocity of ash, its density as well as size of ash particles are major factors that determine wear rate of Bends and Y-Pieces. Here, the use of Alumina Ceramic in Ash Handling systems help in lowering the possibility of wear and damages caused to the internals. Here, our expertise lies in filling the linings in casings manufactured at our works or can also be fitted directly in worn out volute casing at plant site. Well package of Alumina Ceramic Lined Bends Some of the industry areas where these are used include: Coal Fired Thermal Power Projects Mineral processing units Steel Plants Cement Plants Coal and Mineral washeries Aluminium plants

Tubes Erosion Shields

Tubes Erosion Shields are used to reduce excess wear of boiler tubes within the extreme conditions prevalent inside a fossil fuel fired boiler, Sunny Steel is able to manufacture and supply erosion shield solutions to protect and reduce wear in all applicable boiler related situations. Boiler Tube Shields are designed to eliminate major maintenance and downtime costs from boiler and condenser tube failure. Advantages Tube Shields are custom made to fit perfectly to straight sections, curved sections and even finned and specialised tubing. Boiler Tubes Erosion Shields, also known as anti-corrosion Shields, anti-wear plate, anti-wear protection Shields, anti-wear cover plate, anti-corrosion cover plate, boiler climbing pipe, anti-wear pressure plate, etc. , which are used in combination with snap rings. Boiler Tubes Erosion Shields are produced using a high-pressure press and professional mold pressing. The production time is short, the welding performance is good, the welding should not...

Stainless carbon steel composite pipe

The stainless carbon steel composite pipe is made of stainless steel and carbon structural steel. Stainless steel, with its excellent corrosion resistance, abrasion resistance, heat resistance, and its shiny, luxurious surface, and are widely used in various fields of the national economy. Lack of limited by the resources of our NI, relies heavily on imports of stainless steel demand, the price is more expensive, the popularization and application of stainless steel to a certain extent by with constraints. Carbon steel, especially the Q series carbon structural steel, with high bending strength, good impact resistance and anti-fatigue limit, as well as low prices, thus making it the basis of the national economic construction materials, carbon structural steel, its main elements Fe metal reactivity, oxidation in the atmosphere, it is easy to rust, let alone in a corrosive medium or special (wet, dark) environment. Year for its anti-corrosion investment as well as economic losses becaus...

Large diameter ceramic lined tile pipe

The Ceramic tile lined pipe spool is composed by steel pipe, adhensive and abrasion-resistant ceramic, we use 20 # seamless steel pipes shaping with hot bending (it is different from centrifugal casting or steel plate rolling), the ceramic tiles bonding with GWJ-350 high temperature-resistant inorganic adhesive which was developed by TsingHua University and affix abrasion-resistant ceramic in the steel pipes, we use miss match installation instead of directly bonding (this technology was used in the bridge building a thousand years ago), and forms a firm wear-resistance layer after heating solidification. Ceramic tile lined pipe spool is applicable for the pneumatic powder-feeding, and can be used under a temperature of 350℃without aging and peeling for long life. The service life is 4-5 times than the normal abrasion-resistant pipes. Advantage Super wear-resistant, high density: we use 95% of chromium corundum, 100 tons dry-pressing. Elbows formed by hot-bending, the outside of ...

Cast basalt lined steel pipe

Cast basalt lined steel pipe is consist of steel pipe, cast basalt pipe and the concreteness of cement mortar. The excellent performance of cast basalt lined steel pipe is that it sets tenacity of steel pipe, abrasive resistance of cast basalt pipe, concreteness of cement mortar in one. After 30 years of practical use proved cast basalt lined steel pipe is a reliable and effective combination of wear—resistant materials. Be used in a variety of transportation of corrosive materials in working condition. This greatly improves the products adaptive capacity in complicated operation conditions. At the same time. cement mortar is selected as the filling material and this can make the inside surface of steel pipe in alkali mediums. So the surface of steel pipe generates purifying films. These films can prevent being rusted. Flange connection is one kind of common pipeline installation connections. The parameters of the outside steel pipe will be decided according to the working pressure of ...

Ceramic lined pipe

Search This Blog