Ceramic Lined Composite Steel Pipe

Ceramic lined composite steel pipe is made through self-propagating high-temperature synthesis (SHS) technique. The pipe consists of three layers: smooth ceramic lining (compact corundum), ceramic and metal transition layer and the outer seamless steel pipe. The combination of high rigidity of ceramic and high elasticity of steel gives the pipe unmatchable features as an abrasion resistant, heat resistant and corrosion resistant material for use in the fields of power generation, metallurgy, mining, and chemical industry etc.. It has many advantages over steel pipes, cast stone pipes, and steel-plastic compound pipes.
Features: High abrasion resistant: Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungsten-
cobalt hard alloys, and the abrasion resistance is 20 times as carbon steel pipes. Its rigidity is the highest among all oxides.
Corrosion resistant: Corundum is a neutral material, and is acid-proof and fouling -free.

Heat resistant: The pipe can work under circumstances of -50 to 800 degrees Celsius.
Convenient installation: It is much lighter than any other types of composite pipes, and can be welded or connected through flanges.
Cost effective: Ceramic-lined composite steel pipe can take the place of expensive stainless steel, titanium, nickel, cast stone or alloy pipes. Extended service life can also reduce maintenance cost.

Specifications:

Pipe diameters: 50 to 630mm
Elbow angle: 22.5, 45, 60, 90, 120, 135, 150 degrees, etc.
Three way pipes: Y shaped, Y lateral and other special shapes
Four way pipes: straight cross, reducing cross.
Ceramic lining thickness (including transition layer): 3 to 8mm
Ex-works length: less than or equal to 3m. Customized maximum length can be achieved by welding.

Technical performance parameters Ceramic Lined Composite Steel Pipe
Ceramic Lined Composite Steel Pipe is our continuous improvement after years of study introduced new wear-resistant pipes , the main technical performance parameters have the following :
Good wear resistance
Ceramic wear lining layer of the pipe due to the corundum ceramics (a-AL2O3), equivalent to 9.0 Mohs hardness up to HRC90 or more. So for metallurgy, electric power , mining, coal transportation and other industries grinding media have high wear resistance. Confirmed by the industrial operation : it is ten times the wear life of hardened steel or even several times .

Run a small resistance
Due to the inner surface of the pipe ceramic wear smooth, and never rust , not like the convex surface of seamless steel helix exists. After internal surface roughness of the test unit and water resistance characteristics of the test , the inner surface smoothness better than any metal pipes, clearing a drag coefficient of 0.0193 , slightly lower than seamless . Therefore, the tube has a running resistance and other characteristics , can reduce operating costs.

Corrosion-resistant, anti-fouling
Since the ceramic wear steel pipes ceramic layer (a-AL2O3), a neutral character. So with acid and seawater corrosion resistant , and also has anti-scaling and other characteristics.

We can also provide products of other customized sizes at your demand.

Sleeve Type Expansion Joints

Sleeve Type Expansion Joints are primarily designed to compensate for thermal expansion but it is not the only movement being imposed on the pipeline system. Other types of movements can occur that need to be taken into account when providing a pipework flexibility solution such as building settlement, wind loading, vibration from rotating and reciprocating machinery. Related Ceramic lined pipe Ceramic lined pipe is made through self-propagating high-temperature synthesis (SHS) technique. The sleeve type expansion joint is also called tube compensator, pipe expansion joints, which is used for hot fluid pipelines, mainly applied to the laying of straight pipelines. And the working medium can be hot water, steam, oil, etc. The sleeve expansion joint does thermal expansion by sliding its external sleeve. Sleeve compensator Types of Sleeve Type Expansion Joint: Buried sleeve expansion joint: Using advanced sealing structure and sealing materials with the features of easy installation...

Sleeve Type Expansion Joints

Sleeve Type Expansion Joints are primarily designed to compensate for thermal expansion but it is not the only movement being imposed on the pipeline system. Confirmed and drawing by our engineer Other types of movements can occur that need to be taken into account when providing a pipework flexibility solution such as building settlement, wind loading, vibration from rotating and reciprocating machinery. The sleeve type expansion joint is also called tube compensator, pipe expansion joints, which is used for hot fluid pipelines, mainly applied to the laying of straight pipelines. And the working medium can be hot water, steam, oil, etc. The sleeve expansion joint does thermal expansion by sliding its external sleeve.

To help you understand the main features of the wear-resistant composite ceramic pipe

The pipeline is a product that has been developed in recent years. This product has received attention from all aspects. It has a unique advantage of its own. It has been firmly established. Wear self propagating ceramic composite pipe is adopted self propagating ceramic composite pipe aluminum material by centrifugation, heat spreading sintering, because of its good abrasion resistance, water resistance, good corrosion resistance and become one of the many projects in the pipeline wear preferred products, self propagating ceramic composite pipe is easy to break and fall but the manufacturing process the traditional production, and the existence of micro crack, has certain influence on the wear resistance of the process, using the international advanced technology of nano materials, add special additives in traditional ingredients, and the sintering temperature to 2800 DEG C (pressurized aeration technology), SHS products, high strength, small micro crack good toughness, not easy to fa...

Wear-resistant Alloy Composite Pipe

Wear-resistant Alloy Composite Pipe, Composite wear-resistant alloy tube, Wear-resistant Alloy Composite Pipe Wear-resistant alloy steel tubes for the base, lined with super wear-resistant alloy by centrifugal casting, metallurgical combine to form a solid body. LFC elbow vacuum casting process. Resistant alloy tube both excellent wear resistance, high temperature resistance and impact resistance, but also has good toughness, excellent thermal shock resistance to mechanical properties, welding performance, easy installation. Especially suitable for high temperature wear cold shock. Such as electric power, metallurgy, coal, mining, cement and other material handling industry. The product is compared with other wear-resistant pipe, long life, cost of investment economy. Overall mechanical properties 抗弯强度 Flexure strength 抗拉强度 Tensile strength 延伸率 cpecific elongation 断面伸缩率 cross sedtion Stretch ratio 冲出韧性αK Impact toughess 耐磨层硬度 thickness of Wearable...

Ceramic Tile Lined Elbow

Ceramic Tile Lined Elbow has very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. What is Ceramic tile lined pipe? Ceramic Tile Lined Pipe has very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. Ceramic tile lined wear-resistant Features: Ceramic tile lined pipe is our company to absorb similar products at home and abroad on the basis of advanced technology developed a shell for the steel body, within the wear-resistant ceramic tube of the new composite pipe products, with high wear resistance long service life And so on the use of anti-off porcelain tube, porcelain tube mosaic, so that paste more flat, more solid with a strong inorganic adhesive paste, wear-resistant steel bowl welding, porcel...

Ceramic Tile Lined Steel Pipes and Elbows

Ceramic Tile Lined Steel Pipes and Elbows have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. Ceramic Tile Lined Steel Pipes and Elbows have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface. Ceramics with very low friction factor at low impingement angles decreases the abrasion of materials maximally. Its low density makes it easy to carry and install. Furthermore, its diamond-like hardness, fine grain structure and superior mechanical strength are the unique features that make it a wide range of demanding applications, such as coal preparation, power generation, iron and steelmaking, cement, asphalt, dredging, mining and mineral processing, oil and gas drilling. Ceramic Tile lined pipe Ceramic tile lined bendingCeramic Tile lined elbow Ceramic Tile lined elbowCeramic Tile lined pipe Ceramic tile lined pipe Metals...

Types of wear-resistant ceramic pipe and its application in industrial production

Including abrasion resistant ceramic pipe elbow, straight pipe , structural tee, head size, radius sections , adjustable pipe , mainly used for the air force , pumping slurry pipeline and other materials . Because the transmission medium with high hardness, flow speed , flow characteristics, can effectively reduce the transmission medium to the wall to produce long-lasting impact, abrasion , corrosion fatigue causes the pipe was gradually worn out speed. 1 , the definition of wear-resistant ceramic pipe Depending on the working conditions of wear on the wear-resistant ceramic pipe lining materials have different choices. Resistant ceramic lined pipe ( lining of aluminum oxide , silicon carbide , zirconia, silicon nitride , sialon , aluminum nitride, boron nitride , etc. ) ; resistant alloy tube ; hexsteel wearable pipe fittings ; rubber resistant steel grinding tube ; wear-resistant plastic tube ; wear-resistant cast stone pipe ; wearable self-propagating composite pipe ; rare earth al...

Ceramic Lined Reducer Pipe

Reducer pipe , Ceramic Lined Reducer Pipe Ceramic Lined Reducer Pipe is integrally fired ceramic tube , with a special molded ceramic filler pouring inside the pipe reducer assembled . Adjustable ceramic tube ceramic lined pipe affixed to the alumina content of not less than 95 %. 200T dry pressure forming , sintering temperature up to 1670 ℃. Has a strong high-pressure high-temperature capabilities ! Performance advantages Abrasion Ceramic layer ceramic lined pipe reducer Al2O3 content greater than 95% , micro-hardness HV1000-1500, which has a high abrasion resistance, wear resistance than ten times higher than carbon steel after quenching , superior tungsten carbide drill . Corrosion Ceramic materials are neutral , chemically stable , has excellent corrosion resistance and acid resistance , resistant to various inorganic acids, organic acids , organic solvents , and its degree of corrosion of stainless steel is more than ten times . Temperature Temperature above 2000 ℃, long-term wor...

Ceramic lined pipe

Search This Blog